Home Cinema Installations and Noise Transmission Through Doors

The reference level of one soundtrack is 105db and 115db for the LFE channel. Most people would find these levels quite high, but not hard listen to, in a correctly designed home cinema room.

A problem occurs though, when we face the challenge of keeping the noise inside the cinema room. In home installation, quite often we find bedrooms and other living areas to be right next to your home cinema residence. Special room construction techniques allow us put together a sufficient noise barrier, in order to reduce any sound transmission to the adjacent rooms.

However, doors continually been the weakest point, in this attempt. The mass, damping and stiffness of the home cinema door determines its resistance to the passage of any sound waves. A door’s ability lessen noise is offered by its Sound transmission Class. This means, the higher inside the Class the better the efficiency.

One more problem arises though; Sound waves can cross any opening with very little loss. And to top it off, a tiny hole in a barrier would transmit nearly as much sound as a much larger hole. This acoustic property of sound could be an oversized problem in a home cinema installation, where high quality construction is required. In the area where acoustical gaskets come into engage. A home cinema door, in order to be effective, the seals around the head, jamb and sill must be complete and air-tight.

In other words, the quality of the acoustical gasket in a house cinema installation, would see how close a lot more sound performance of the door, arrives to the published list of specifications. A hi-end Home Cinema Installation St Albans cinema design should take every detail into consideration, to ensure a hi-end acoustical conclude.